nybjtp

Fast Turn Multilayer Rigid Flex Pcb bakeng sa Car Gear Shift Knob

Case Analysis--Fast Turn Multilayer Rigid Flex Pcb for Car Gear Shift Knob

Litlhoko tsa tekheniki
Mofuta oa sehlahisoa Li-Rigid Flex PCB Boards
Nomoro ea lera 4 Mekhahlelo
Bophara ba line le
sebaka sa mela
0.15MM/0.1MM
Botenya ba boto FPC=0.15MM T=1.6MM
Botenya ba Koporo 1OZ
Botenya ba lifilimi 27.5UM
Kalafo ea Bokaholimo ENIG 2-3uin
Litlhoko tsa ho Mamella 0.075MM
Ho satalla TG150 epoxy board
Sebopeho Litlhoko tse thata tsa ho mamella, ho nepahala ho phahameng.
Teko e sebetsang AOI/four-wire/continuity/copper slices
Koloi ea Kopo Toyota
Kopo Knob ea Gear Gear Shift
Fast Turn Multilayer Rigid Flex Pcb bakeng sa Car Gear Shift Knob

4 Layers Rigid Flex PCB

Fast Turn Multilayer Rigid Flex Pcb bakeng sa Car Gear Shift Knob

Knob ea Gear Gear Shift

Ntlafatsa konopo ea lisebelisoa tsa koloi ea hau ka PCB ea rona e potlakileng ea multilayer rigid flex.Natefeloa ke ts'ebetso ea ho feto-fetoha ha lisebelisoa ka mokhoa o se nang moeli le ho tšoarella ha nako e telele.PCB ea rona ea multilayer rigid rigid e fana ka nako ea phetoho e potlakileng le ts'epahalo e phahameng bakeng sa ho fetoha ha bonolo.

Re hlahisa PCB ea rona e feto-fetohang e potlakileng ea 4-layer rigid-flex flex, e etselitsoeng ka ho khetheha likonopo tsa ho fetola lisebelisoa tsa likoloi.E na le mamello e matla le ho nepahala ho phahameng, sehlahisoa sena se tsoetseng pele se fana ka ts'ebetso e tsitsitseng le ho tšoarella ho eketsehileng, ho isa boiphihlelo ba hau ba ho khanna holimo.

PCB ea rona e thata-thata e na le likarolo tse 4 ho netefatsa ts'ebetso e nepahetseng le ts'ebetso ea koloi ea hau.Bophara ba mohala le sebaka sa 0.15MM/0.1MM se netefatsa phetiso ea mats'oao e nepahetseng le e sebetsang hantle.Botenya ba poleiti ea FPC=0.15MM le T=1.6MM bo fana ka motheo o tiileng le o ts'epahalang bakeng sa kotola ea hau ea shift.

PCB ea rona e thata-flexible e na le botenya ba koporo ba 1OZ le botenya ba filimi ea 27.5UM, e fana ka conductivity e babatsehang le nako e telele.Phekolo ea bokaholimo ba ENIG 2-3uin e eketsa ts'ebetso ea eona le bophelo bo bolelele.Sehlahisoa sena se na le boima ba boto ea epoxy ea TG150, e netefatsang botsitso le ho hanyetsa ho apara.

Ho netefatsa boleng bo phahameng ka ho fetisisa, liboto tsa rona tse sa fetoheng li kena litekong tse matla tsa ts'ebetso, ho kenyeletsoa AOI (Automated Optical Inspection), tlhahlobo ea mehala e mene, tlhahlobo e tsoelang pele, le tlhahlobo ea maqephe a koporo.Ha re tlohele ho fana ka lihlahisoa tsa boleng tse finyellang litlhoko tsohle tsa hau.

PCB ea rona ea li-multi-layer rigid-flex flex e etselitsoe ka ho khetheha likoloi tsa Toyota 'me ke ntlafatso e phethahetseng ho knob ea koloi ea hau.Ka kopanyo ea eona e se nang moeli le ts'ebetso e phahameng, u ka lebella liphetoho tse bonolo, tse nepahetseng nako le nako ha u fihla tseleng.

Ho Shenzhen Capel Technology Co., Ltd., re motlotlo ka ho fana ka litharollo tse tsoetseng pele tse fihlelang le ho feta litebello tsa bareki ba rona.Ka ts'ebetso ea rona ea ho fetola kapele, o ka itšetleha ka linako tsa phetoho e potlakileng, ho netefatsa hore nako ea koloi ea hau e fokotsehile.Tšepa boitseanape ba rona le ts'epahalo, PCB ea rona e potlakileng ea mekhahlelo e mengata e thata-thata bakeng sa knob ea likoloi e tla fetola boiphihlelo ba hau ba ho khanna.

 

 

                                               KE HOBANE'NG HA RE KHETHA KAPALE

Shenzhen Capel Technology Co., Ltdliboto tsa potoloho tse maemong a holimo, tse nepahetseng haholo ho tloha ka 2009.

Re na le Lilemo tse 15 tsa setsebile botekgenikiphihlelo'me u be le batho ba holileng, ba khabane, 'me ba tsoetse pelebokgoni ba ho etsa thepa.

Re khona ho fana ka customized1-30 layer flexible circuit boards, 2-32 layer rigid-flex PCBs, le 1-60 layers PCBs tse thataho bareki baTsa makoloiIndasteri.

 

Tšebeletso ea Capel:

Tšehetsa Tloaelo1-30 Layer FPC Flexible PCB,2-32 Layer Rigid-Flex Circuit Boards,1-60 Layer Rigid PCB,Maboto a HDI a Phahameng ka ho Fetisisa,Reliable Quick Turn PCB Prototyping,Seboka se potlakileng sa SMT PCB

Indasteri eo re e sebeletsang:

Lisebelisoa tsa Bongaka,IOT, TLHOKOMELO, UAV, Sefofane, Tsa makoloi, Mehala ea puisano, Electronics ea bareki, Sesole, Sepakapaka, Taolo ea Liindasteri, Bohlale ba maiketsetso,EV, joalo-joalo...

 

 

Sehlopha Bokhoni ba Ts'ebetso Sehlopha Bokhoni ba Ts'ebetso
Mofuta oa Tlhahiso FPC e le 'ngoe / Mekhahlelo e habeli FPC
Multi-layer FPC / Aluminium PCBs
Regid-Flex PCB
Layer Number Likarolo tse 1-30FPC Flexible PCB
Likarolo tse 2-32E thata-FlexPCB

1-60 mekhahleloPCB e thata

HDIMaboto

Max Manufacture size FPC e le 'ngoe ea 4000mm
Mekhahlelo e habeli FPC 1200mm
Multi-layer FPC 750mm
Regid-Flex PCB 750mm
Insulating LayerBotenya 27.5um / 37.5/ 50um / 65/ 75um / 100um /
125um / 150um
Botenya ba Boto FPC 0.06mm - 0.4mm
Rigid-Flex PCB 0.25 - 6.0mm
Mamello ea PTHBoholo ± 0.075mm
Surface Finish Ho qoelisoa ka Khauta / Ho qoelisoa
Silver/Gold Plating/Tin Plating/OSP
Stiffener FR4 / PI / PET / SUS / PSA/Alu
Semicircle Orifice Size Ka tlase ho 0.4mm Min Line Space/ bophara 0.045mm/0.045mm
Botenya Mamello ± 0.03 limilimithara Tšitiso 50Ω-120Ω
Botenya ba Koporo ea Foil 9um/12um/18um/35um/70um/100um TšitisoLaolwaMamello ±10%
Mamello ea NPTHBoholo ± 0.05 limilimithara The Min Flush Width 0.80 limilimithara
Min Via Hole 0.1 limilimithara PhethahatsaStandard GB / IPC-650 / IPC-6012 / IPC-6013II /
IPC-6013III
Khauta ea ho qoelisoa AU 0.025-0.075UM /NI1-4UM Electro nickel khauta AU 0.025-25.4UM / NI 1-25.4UM
Setifikeiti UL le ROHS
ISO 14001:2015
ISO 9001:2015
IATF16949:2016
Patents dipatente tsa mohlala
boiqapelo dipatente

moralo oa pcb

 

             8 lera HDI Flexible PCBs bakeng sa Bongaka                                    10 layer Rigid-Flex Circuit Boards bakeng sa Aerospace

 

tenyetsehang pcb moralo

                                    4 layer Flex PCB Circuits for Industry Control                              16 lera Rigid Flexible PCBs bakeng sa Likoloi

 

 

Lisebelisoa tse tsoetseng pele:

Re na le lisebelisoa tsa morao-rao le tsa morao-rao tse tsoetseng pele ka ho fetisisa tsa tlhahiso le theknoloji, ho kenyelletsa le mechine e nepahetseng ea photolithography, mechine ea etching, lisebelisoa tsa kopano,etc.Tsena

lisebelisoa li netefatsa ho nepahala, ho sebetsa hantle le botsitso ba ts'ebetso ea tlhahiso, ka hona ho fa bareki lihlahisoa tsa boleng bo holimo.sehlahisoa sa boleng.Lihlahisoa tsa boleng bo phahameng tse feto-fetohang tsa boto ea potoloho.

Mokhoa oa Tlhahiso ea Rigid-Flex PCB

Taolo ea boleng bo thata:

Khampani ea rona e beha taolo ea boleng pele 'me e sebelisa letoto la mehato e tiileng ea ho laola boleng ho pholletsa le ts'ebetso eohle ea tlhahiso.Mohato o mong le o mong ho tsoa ho khetho le ho reka

ea lihlahisoa tse tala bakeng sa tlhahiso le ho paka e hlahlojoa ka botlalo le ho lekoa ho netefatsa hore sehlahisoa se seng le se seng sa boto ea potoloho se feto-fetohang se kopana le maemo a holimo.

Tsamaiso e sebetsang hantle ea tlhahiso:

Re na le mokhoa o sebetsang oa tsamaiso ea tlhahiso ho ntlafatsa ts'ebetso ea tlhahiso, ho ntlafatsa katleho ea tlhahiso le ho fokotsa litšenyehelo.Ka phihlelo e ruileng ea tlhahiso, re ka potlakela ho arabela litlhoko tsa bareki le ho netefatsa ho fana ka nako ka nako.

Tšebeletso e phethahetseng ka mor'a thekiso:

Re tsepame ho bareki 'me re fana ka tšebeletso e phethahetseng ka mor'a thekiso.Ebang ke ho rarolla mathata nakong ea tšebeliso ea sehlahisoa kapa ho fana ka tšehetso ea tekheniki le lits'ebeletso tsa tokiso, re ka arabela ka nako e nepahetseng mme ra fana ka tharollo.Ka ho sebelisa lipoleloana tsena, u ka bontša ka katleho matla le melemo ea k'hamphani ka mokhoa o bonolo oa tlhahiso ea boto ea potoloho, kahoo u fumana tšepo le kananelo ea bareki.

 

taolo ya boleng bakeng sa pcb

 

Re ka fa bareki boleng ba boleng bo holimoprototyping e potlakileng, e tšepahalang ka potlakotlhahiso ka bongata, lephano e potlakilengto thusa merero ea bona ho kena 'marakeng kapele le ka thelelo le ho fumana melemo ea tlholisano.

Tsamaiso e matla ea phepelo ea thepa:

Re thehile likamano tsa nako e telele tsa ts'ebelisano 'moho le barekisi ba bangata ba boleng bo holimo ho netefatsa phihlello e nakong ea thepa e tala ea boleng bo holimo.Ka nako e ts'oanang, re na le sehlopha se sebetsang hantle sa taolo ea phepelo se ka laolang ka botlalo boemo ba phepelo ea thepa e tala, ho netefatsa hore thepa e teng ka nako, le ho ts'ehetsa tlhahiso le phano e potlakileng.

Moralo oa tlhahiso o feto-fetohang:

Re sebelisa mokhoa o tsoetseng pele oa moralo oa tlhahiso o ka fetolang kapele le ho hlophisa ho latela litlhoko tsa bareki.Ebang ke tlhahiso ea prototype kapa tlhahiso e kholo, re ka fana ka lisebelisoa ka mokhoa o bonolo ho phethahatsa tlhahiso ka nako e khuts'oane le ho netefatsa ho tsamaisoa ka nako.

Phallo e sebetsang hantle:

Re na le ts'ebetso e sebetsang ea tlhahiso 'me re rera ka thata le ho laola ts'ebetso eohle ho tloha ho resiti ea odara ho isa ho thomello ea lihlahisoa.Ka ho ntlafatsa ts'ebetso ea tlhahiso, ho ntlafatsa katleho ea tlhahiso, le ho kenya ts'ebetsong mehato ea taolo ea boleng, re ka etsa le ho fana ka lihlahisoa ka potlako ho netefatsa qalo e ntle ea merero ea bareki ba rona.

Karabo e potlakileng:

Re hokela bohlokoa bo boholo ho litlhoko tsa bareki mme re khona ho arabela kapele le ho lokisa tlhahiso le kemiso ka nepo.Ebang ke taelo e potlakileng kapa ke boemo bo sa lebelloang, re ka etsa liqeto kapele le ho nka mehato e nepahetseng ho netefatsa hore re fihla ka nako.

Tsamaiso e tšepahalang ea thepa:

Re sebelisana 'moho le lik'hamphani tse ngata tsa profeshenale tsa thepa ho netefatsa hore thepa e tlisoa ho bareki ka mokhoa o sireletsehileng le ka nako.Re na le ts'ebetso e felletseng ea taolo ea thepa le sistimi ea polokelo e ka latellang maemo a lipalangoang ka nepo le ho netefatsa ho tsamaisoa ka nako.

nako ea thomello


Nako ea poso: Aug-10-2023
  • E fetileng:
  • E 'ngoe:

  • Morao